What the manufacturer currently lists
NothingProjector currently describes the Black Series Slimline as a motorized tension drop-down screen for ultra-short-throw projectors. The published spec table lists 0.6 gain, a 180° viewing angle, 95% ambient-light rejection and support for 3D/4K/8K. The product page also describes remote-controlled height adjustment with a memory function, a wall switch and a tab-tensioned surface intended to stay flat.
The biggest reason to consider it
The strongest use case is a multipurpose living room. A fixed frame screen can dominate a wall even when the projector is off. A drop-down screen moves the viewing surface out of sight, while the ALR/CLR-style optical surface is intended to preserve more contrast when normal room light is present. That combination is the core value proposition — not simply the fact that the screen is motorized.
Important compatibility check: PRO vs PRO A
The merchant distinguishes two installation orientations. PRO is described for a UST projector placed below the screen on a cabinet or bench. PRO A is described for a UST projector mounted above the screen. That distinction matters because directional ALR material is built around the angle from which projector light arrives. Do not treat the two variants as cosmetic choices.
Size information needs a final checkout check
The current product page shows selectable sizes including 84, 92, 100 and 120 inches, while a visible specification table lists 100–120 inches. Because those two pieces of on-page information are not perfectly aligned, confirm the exact size/variant combination shown in the live selector before purchasing.
What we would verify before buying
Measure the full cassette width, the available drop distance, projector position and the wall area behind the screen. Check whether side light or direct sun hits the screen. Confirm the correct optical orientation, plug type and installation method. Finally, look at the live shipping status and current price rather than relying on an old quoted figure.
Who this format makes the most sense for
It is most compelling for a UST owner in a living room or media room who values a hidden screen, expects some ambient light, and is prepared to plan the installation carefully. A dark dedicated theater may not need ALR at all, and a fixed frame can be simpler if the screen never needs to disappear.
Frequently asked questions
Is the NothingProjector Black Series drop-down screen only for UST projectors?
The current merchant page states that this model is compatible with UST projectors only.
What gain does the manufacturer list?
The current published specification is 0.6 gain.
Does the screen reject all daylight?
No screen should be treated as immune to direct sunlight. ALR helps manage ambient light, but room layout and light direction still matter.
Has ProjectionPilot personally tested this screen?
No. This page is a research-based review using published product information and clearly labeled analysis.
Research note
Product-specific facts on this page were checked against the NothingProjector product listing and related manufacturer listings on September 16, 2026. Where we discuss fit, trade-offs or room design, that is editorial analysis rather than a claim of hands-on testing. Live merchant details can change.